No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Configuration Guide - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VPLS Interworking

Configuring VPLS Interworking

VPLS interworking allows different types of VPLS networks to communicate.

Usage Scenario

LDP VPLS uses LDP signaling packets that carry the FEC 128 TLV to establish and maintain PWs after VPLS members are manually specified. BGP VPLS uses BGP to automatically discover VPLS members and BGP signaling packets to establish and maintain PWs. BGP AD VPLS uses BGP to automatically discover VPLS members and uses LDP signaling packets that carry the FEC 129 TLV to establish and maintain PWs. LDP VPLS applies to VPLS networks with few sites, whereas BGP VPLS and BGP AD VPLS apply to VPLS networks with large numbers of sites. For carriers with both LDP VPLS and BGP VPLS or both LDP VPLS and BGP AD VPLS networks, interworking between LDP VPLS and BGP VPLS or between LDP VPLS and BGP AD VPLS enables them to improve VPLS network expansibility and reduce network operation costs.

Pre-configuration tasks

Before configuring VPLS interworking, complete the following tasks:

  • Configure interface IP addresses and routes on PEs and SPEs to ensure IP connectivity.

  • Configure LSR IDs and basic MPLS functions on PEs and SPEs.

  • Establish tunnels between PEs and between PEs and SPEs to transmit service traffic.

Configuration Procedures

Perform one or more of the following configurations as required.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058925

Views: 27332

Downloads: 51

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next