No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Feature Description - IP Services 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - IP Services
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Static ARP

Static ARP


Static ARP allows a network administrator to create the mapping between IP and MAC addresses.


The difference between static ARP and dynamic ARP lies in the method of generating and maintaining ARP entries. Dynamic ARP entries are automatically generated and maintained using ARP packets, while static ARP entries must be manually configured and maintained by network administrators. The advantages and disadvantages of dynamic and static ARP are as follows:
  • Dynamic ARP

    • Advantages: Dynamic ARP entries free network administrators from manual configuration and maintenance. Especially when a network device becomes faulty or the NIC on a host is frequency replaced, the real-time updates of ARP entries greatly reduce the maintenance workload of network administrators.

    • Disadvantages:
      • Dynamic ARP entries can be aged out or overridden by new ones, which fails to ensure stability and security of network communication.
      • The execution of dynamic ARP consumes network resources, which is not applicable to networks with insufficient bandwidth resources and may impact user services.
  • Sta‎‎‎‎‏‏‏‏‏tic ARP

    • Advantages:
      • Static ARP entries will not age out or be overridden by dynamic ARP entries, which ensures stability of network communication.
      • The configuration of static ARP binds IP addresses and MAC addresses, which prevents network attackers from modifying ARP entries and ensures security of network communication.
      • The configuration of static ARP eliminates the need of configuring dynamic ARP, reducing network resource consumption.
    • Disadvantages: Static ARP entries need to be manually configured by network administrators, causing heavy maintenance workload when it comes to frequent changes of the network structure.

Static ARP implements the following functions:

  • Binds IP addresses to the MAC address of a specified gateway so that IP datagrams destined for these IP addresses must be forwarded by this gateway.

  • Binds the destination IP addresses of IP datagrams sent by a specified host to a nonexistent MAC address, helping filter out unwanted IP datagrams.

To ensure the stability and security of network communication, deploy static ARP based on actual requirements and network resources.

Related Concepts

Static ARP entries are classified as short or long entries.
  • Short static ARP entries

    Short static ARP entries contain only IP and MAC addresses. A device still has to send ARP request messages. If the source IP and MAC addresses of the received reply messages are the same as the configured IP and MAC addresses in a short static ARP entry, the device adds the interface that receives the ARP reply messages to the short static ARP entry. The device can use this interface to forward subsequent messages directly. Short static ARP entries cannot be directly used to forward messages.

    Configuring short static ARP entries enables a host and a device to communicate using fixed IP and MAC addresses.

    In Network Load Balancing (NLB) scenarios, you must configure both MAC entries with multiple outbound interfaces and short static ARP entries for the gateway. These MAC entries and short static ARP entries must have the same MAC address. In NLB scenarios, short static ARP entries are also called ARP entries with multiple outbound interfaces and cannot be updated manually.
  • Long static ARP entries

    Long static ARP entries contain IP and MAC addresses as well as the VLAN and outbound interface through which devices send packets. Long static ARP entries are directly used to forward messages.

    Configuring long static ARP entries enables a host and a device to communicate through a specified interface in a VLAN.

Usage Scenario

Static ARP applies to the following scenarios:

  • Networks with a simple topology and high stability
  • Networks on which information security is of high priority, such as a government or military network
  • Short static ARP entries mainly apply to scenarios in which network administrators want to bind hosts' IP and MAC addresses but hosts' access interfaces can change.


Static ARP ensures communication security. If a static ARP entry is configured on a device, the device can communicate with the peer device using only the specified MAC address. Network attackers cannot modify the mapping between the IP and MAC addresses using ARP messages, ensuring communication between the two devices.

Updated: 2019-01-14

Document ID: EDOC1100058931

Views: 10408

Downloads: 17

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next