No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Feature Description - MPLS 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - MPLS
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD for TE Tunnel

BFD for TE Tunnel

BFD for TE supports BFD for TE tunnel and BFD for TE CR-LSP. This section describes BFD for TE tunnel.

The BFD mechanism detects communication faults in links between forwarding engines. The BFD mechanism monitors the connectivity of a data protocol on a bidirectional path between systems. The path can be a physical link or a logical link, for example, a TE tunnel.

BFD detects faults in an entire TE tunnel. If a fault is detected and the primary TE tunnel is enabled with virtual private network (VPN) FRR, a traffic switchover is rapidly triggered, which minimizes the impact on traffic.

On a VPN FRR network, a TE tunnel is established between PEs, and the BFD mechanism is used to detect faults in the tunnel. If the BFD mechanism detects a fault, VPN FRR switching is performed in milliseconds.

Updated: 2019-01-14

Document ID: EDOC1100058933

Views: 9820

Downloads: 12

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next