No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Feature Description - QoS 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - QoS
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of MPLS QoS

Overview of MPLS QoS

Multiprotocol Label Switching (MPLS) uses label-based forwarding to replace traditional route-based forwarding. MPLS has a powerful and flexible routing function and can meet the requirements of various applications for the network. MPLS can be implemented on various physical media, such as the Ethernet, PPP, ATM.

Currently MPLS widely applies to large-scale networks. Therefore, quality of service (QoS) for MPLS networks must be deliberately deployed.

MPLS establishes label switched paths (LSPs) to implement connection-oriented forwarding. QoS for LSP provides QoS guarantee for data flows transmitted over LSPs. Therefore, the DiffServ and IntServ models are applied to MPLS networks. The combination of MPLS and IntServ shapes multiprotocol label switching traffic engineering (MPLS TE), and the combination of MPLS and DiffServ shapes MPLS DiffServ.

MPLS TE - Combination of MPLS and IntServ

IntServ uses the Resource Reservation Protocol (RSVP) to apply for resources over the entire network and maintains a forwarding state for each data flow, hindering the extensibility. Therefore, IntServ does not prevail on networks. Relevant standards, however, extends RSVP by allowing RSVP PATH messages to carry label requests and RSVP RESV messages to support label allocation. The extended RSVP is called Resource Reservation Protocol-Traffic Engineering (RSVP-TE). RSVP-TE allows MPLS to control the path through which traffic traverses and reserve resources during LSP establishment so that traffic can bypass congestion nodes. This method of balancing network traffic is called MPLS TE.

MPLS TE controls the path through which traffic traverses but cannot identify services. Traffic is transmitted along LSPs, regardless of service priorities. Therefore, if the actual traffic rate exceeds the specification, requirements for services that are sensitive to QoS are not satisfied. Therefore, MPLS TE alone cannot provide the QoS guarantee.

MPLS DiffServ - Combination of MPLS and DiffServ

The DiffServ model can distinguish services based on packet contents and allow packets with high priorities to be forwarded preferentially. Therefore, DiffServ widely applies to MPLS networks.

However, DiffServ reserves resources only on a single node and cannot specify the bandwidth for each service in advance. When the traffic rate exceeds the allowed bandwidth, high-priority services are forwarded preferentially at the cost that delays and packet loss of low-priority services deteriorate. In the case of severe traffic congestion, even high-priority services are delayed or lost. Therefore, MPLS DiffServ alone can hardly provide the end-to-end QoS guarantee or allow services to comply with the Service Level Agreement (SLA).

VPN QoS - MPLS QoS Application on MPLS VPNs

VPN QoS combines MPLS QoS and MPLS VPN to serve for networking that bears services of various priorities. VPN QoS distinguishes services of different priorities and ensures that high-priority services are forwarded preferentially. This guarantees the QoS for important services on VPNs.

DiffServ, RSVP-TE, and MPLS VPN can be jointly used based on actual requirements to isolate services, distinguish services of different priorities, ensure bandwidth resources for important services or important VPNs, and forwards packets on VPNs or MPLS-TE tunnels based on packet priorities. This provides a solid technical basis for carriers to develop voice, video, and SLA-complying VPN services.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058936

Views: 3519

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next