No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Feature Description - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPN Dual-Stack Access

VPN Dual-Stack Access

IPv4 address exhaustion forces carriers to put IPv6 network planning issues high on their agendas. For the BGP/MPLS IPv4 VPN services that have been widely deployed, supporting VPN dual-stack access is a practical and readily available solution to the transition from IPv4 to IPv6.

Originally, interfaces in a VPN support only a single type of protocol stack. After VPN dual-stack access is configured, both IPv4 and IPv6 address families can be configured in a VPN so that the interfaces bound to this VPN can support not only IPv4 VPN access but also IPv6 VPN access. This implementation greatly improves the feasibility of the transition from IPv4 to IPv6.

As shown in Figure 5-45, IPv4/IPv6 VPN dual-stack access allows VPN sites to support both IPv4 and IPv6 networks and to be connected to a PE through the same interface.

Figure 5-45 Networking diagram for VPN dual-stack access
Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058940

Views: 12809

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next