No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Feature Description - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - VPN
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPLS Accessing L3VPN

VPLS Accessing L3VPN

On the network shown in Figure 9-6, the NPE functions as the PE of both the access network and the bearer network. In addition to VPLS, the NPE needs to support the gateway function, including the configuration of IP addresses, access to L3VPNs, ARP, and packet forwarding.

When a CE needs to access the L3VPN, the CE sends an ARP request to the gateway interface of the NPE. The NPE then forwards traffic between the L2VPN and L3VPN. Meanwhile, the traffic forwarding on the original L2VPN is not affected. The NPE needs to broadcast ARP packets locally and in the VSI.

Figure 9-6 VPLS accessing L3VPN

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058940

Views: 13028

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next