No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Feature Description - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hard-Pipe-based Enterprise Leased Line Protection

Hard-Pipe-based Enterprise Leased Line Protection

Tunnel protection groups can be configured for hard-pipe-based enterprise leased lines to protect the network against faults. On the network shown in Figure 7-8, master and backup tunnels are established using hard pipes between the PEs, forming a tunnel protection group. Hard-pipe-based PWs are established over the tunnel protection group. TP-OAM is deployed for the master tunnel. If the master tunnel link or a P fails, traffic can be quickly switched to the backup tunnel, implementing protection switching.

Figure 7-8 Hard pipe enterprise leased line tunnel protection

Updated: 2019-01-14

Document ID: EDOC1100058940

Views: 19621

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next