No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Feature Description - VPN 01

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Feature Description - VPN
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of Multicast VPLS

Application of Multicast VPLS

Multicast VPLS is deployed on IP/MPLS backbone networks to solve multicast service issues related to traffic congestion, transmission reliability, and data security. Figure 8-36 shows the application of multicast VPLS on an IP/MPLS backbone network.

Figure 8-36 Application of multicast VPLS on an IP/MPLS backbone network

To carry multicast traffic over P2MP tunnels by means of multicast VPLS:
  • Configure BGP and multicast VPLS on the IP/MPLS backbone network. BGP is used to exchange BGP routes between PEs on the same multicast VPLS network.
  • Configure MPLS for the establishment of P2MP tunnels on the IP/MPLS backbone network.
Updated: 2019-01-14

Document ID: EDOC1100058940

Views: 16390

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next