No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PGND Cable

PGND Cable

PGND cable is used to ground the NE.

The PGND cable is used to ground the NE.

EDCh PGND cable consists of a cable and one or two OT terminals. Figure 6-5 shows the appearance of the PGND cable and Table 6-4 lists the technical specifications of the PGND cable.

Figure 6-5 Appearance of the PGND cable

Table 6-4 Technical specifications of the PGND cable

Cable Parameter

Terminal Parameter

Electronic/electric cable-450 V/750 V-H07Z-K-4 mm2-yellow green-low-smoke halogen-free fireproof cable

Bare crimp terminal-OT-6mm2-Tin plating-Circular pre-insulated terminal-12-10AWG-Yellow

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16409

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next