No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
R01S100 Outdoor Cabinet

R01S100 Outdoor Cabinet

The R01S100 outdoor cabinet, complying with the IP55 protection ratings, supports flexible installation, such as outdoor installation on a wall, pole, or concrete pedestal.

Figure 7-7 shows the appearance of the R01S100 outdoor cabinet. The cabinet shell is a galvanized steel plate with the coating of polyester powder, well protecting the cabinet against corrosion.

Figure 7-7 Appearance of the R01S100 outdoor cabinet

The R01S100 outdoor cabinet uses a wall-mounted heat exchanger to passively dissipate heat. In high-temperature (higher than 45°C) areas, you can install enhanced heat dissipation modules on the outdoor cabinet to improve its heat dissipation capability.

The R01S100 outdoor cabinet provides a 4 U installation space, with the inner 2 U for the power distribution box and power system and the outer 2 U for the NE. Figure 7-8 shows the internal structure of the R01S100 outdoor cabinet.

Figure 7-8 Internal structure of an R01S100 outdoor cabinet

Table 7-5 lists the technical specifications of the R01S100 outdoor cabinet.

Table 7-5 Technical specifications of the R01S100 outdoor cabinet
Item Specification
Battery compartment dimensions 203 mm (H) x 250 mm (D) x 670 mm (W)
Enhanced heat dissipation module dimensions 80 mm (H) x 250 mm (D) x 670 mm (W)
Cabinet dimensions (with the enhanced heat dissipation module and battery compartment) 1113 mm (H) x 250 mm (D) x 670 mm (W)
Installation space 4 U (1 U = 44.45 mm)

245 mm height for the outer 3 U and 145 mm height for the inner 1 U

Allowable internal heat consumption ≤ 200 W
Allowable internal heat consumption (with the enhanced heat dissipation module) ≤ 300 W
Protection ratings IP55
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16233

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next