No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
75-Ohm 16 x E1 Cables

75-Ohm 16 x E1 Cables

On the device, Anea96 connectors are used to input and output 75-ohm E1 signals.

At one end of the 75-ohm 16 x E1 cable, the Anea96 connector is used to connect the 75-ohm E1 electrical interface on the board; the other end is connected to the digital distribution frame (DDF). Make the connector as required on site.

Structure

Figure 6-15 shows the appearance of the 75-ohm 16 x E1 cable and Figure 6-16 shows the structure of the cable.

Figure 6-15 Appearance of the 75-ohm 16 x E1 cable

Figure 6-16 Structure of the 75-ohm 16 x E1 cable

Pin Assignment

Table 6-22 lists the pin assignment of the 75-ohm 16 x E1 cable connector.

Table 6-22 Pin assignment of the 75-ohm E1 cable connector

Connector Pin

Cable

Remarks

Connector Pin

Cable

Remarks

Core

Serial No.

Core

Serial No.

1

Tip

1

R0

25

Tip

2

T0

2

Ring

26

Ring

3

Tip

3

R1

27

Tip

4

T1

4

Ring

28

Ring

5

Tip

5

R2

29

Tip

6

T2

6

Ring

30

Ring

7

Tip

7

R3

31

Tip

8

T3

8

Ring

32

Ring

9

Tip

9

R4

33

Tip

10

T4

10

Ring

34

Ring

11

Tip

11

R5

35

Tip

12

T5

12

Ring

36

Ring

13

Tip

13

R6

37

Tip

14

T6

14

Ring

38

Ring

15

Tip

15

R7

39

Tip

16

T7

16

Ring

40

Ring

17

Tip

17

R8

41

Tip

18

T8

18

Ring

42

Ring

19

Tip

19

R9

43

Tip

20

T9

20

Ring

44

Ring

21

Tip

21

R10

45

Tip

22

T10

22

Ring

46

Ring

23

Tip

23

R11

47

Tip

24

T11

24

Ring

48

Ring

49

Tip

25

R12

73

Tip

26

T12

50

Ring

74

Ring

51

Tip

27

R13

75

Tip

28

T13

52

Ring

76

Ring

53

Tip

29

R14

77

Tip

30

T14

54

Ring

78

Ring

55

Tip

31

R15

79

Tip

32

T15

56

Ring

80

Ring

Shell

External braid shield layer

Technical Specifications

Table 6-23 Technical specifications of the 75-ohm 16 x E1 cable

Item

Specification

Cable

Trunk Cable, 75ohm, 16E1, 1.6mm,Anea 96F-I,SYFVZP75-1.1/0.26*32(S), +45deg

Connector

Cable Connector, Anea, 96PIN, Suite Of Female Connector And Shielding Case, IDC Type, For 28-30 AWG Solid Wire, 1 A

Cable type

Coaxial Cable, SYFVZP-MC 75-1-1*32, 75 ohm, 12.40 mm(0.49 in.), 1.1 mm(0.04 in.), 0.26 mm(0.01 in.), Pantone Warm Gray 1U, Only for OEM

Diameter of the shield layer - diameter of the internal insulation layer - diameter of the internal conductor

12.4 mm(0.49 in.) - 1.6 mm(0.06 in.) - 0.26 mm(0.01 in.)

Number of cores

32

Available length

5 m, 10 m, 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m

16.40 ft.,32.80 ft.,49.21 ft.,65.62 ft.,82.02 ft.,98.42 ft.,114.83 ft.,131.23 ft.147.64 ft.,164.04 ft.

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16111

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next