No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel RS485 Board

4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel RS485 Board

Overview

Table 4-117 Board attributes

Attribute

Description

Board name silkscreen

D1MPAA

Description

4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel RS485 Board

BOM

03056725

Model

NEDD01MPAA00

Table 4-118 Mapping products and versions

Product

Slot ID

Earliest Software Version

NE08E-S6E

All slots(with MPU - NED3CXPA)

All slots(with MPU - NED3CXPB)

V300R003C00

NE08E-S9

All slots(with MPU - NEJ1CXPA)

V300R003C10

Appearance



Panel

Table 4-119 Indicators

Name

Description

STAT

Board status indicator

On (green): the board is working normally.

On (red): the board hardware is faulty.

On (orange): the board is not loaded with the logic.

Off: the board is not running or no power is input.

Table 4-120 Service interfaces

Interface Name

Interface Type

Connector Type

Description

Cable

RS232 0 RS485 1

RS232 2 RS485 3

RS-232/RS-485/RS-422

RJ45

Used for RS-232/RS-485/RS-422 signal input

RS-232: RS-232 Serial Interface Cable

RS-485/RS-422: Must be made on site based on the interface type of the remote device.

EM4 to EM5

E&M

RJ45

10GE service signal input and output interface

Must be made on site based on the interface type of the remote device.

FXSO6 to FXSO9

FXS/FXO

RJ11

Used as an FXS interface for simulating a subscriber's line interface and for normal analog phone and fax machine access.

Used as an FXO interface (functioning as a loop trunk interface) for PSTN access.

Standard Telephone Line

Functional Specifications

Table 4-121 Functions and features

Functions and Features

Remarks

Line-Rate capability

Occupies one flexible card slot.

Reliability and availability

Supports the hot swappable function.

Interface function

Supports the full duplex mode or auto-negotiation mode.

Supports inloops and outloops.

Supports the traffic control function.

Supports Layer 2 and Layer 3 working modes.

Technical Specifications

Table 4-122 Board specifications

Item

Specification

Dimensions (H x W x D)

19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)

Typical power consumption

12.0 W

Typical heat dissipation

38.9 BTU/hour

Weight

0.5 kg (1.10 lb)

Ambient temperature

Long terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16205

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next