No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
4 Channels 10GE Optical Interface Board(SFP+)

4 Channels 10GE Optical Interface Board(SFP+)

Overview

Table 4-136 Board attributes

Attribute

Description

Board name silkscreen

D1EX4S

Description

4 Channels 10GE Optical Interface Board(SFP+)

BOM

03058043

Model

NEKD00EX4S00

Table 4-137 Mapping products and versions

Product

Slot ID

Earliest Software Version

NE08E-S6E

slot 1 to slot 2(with MPU - NED3CXPA)

slot1,slot2(with MPU - NED3CXPB)

V300R003C00

NE08E-S9

slot5,slot6(with MPU - NEJ1CXPA)

V300R003C10

Appearance



Panel

Table 4-138 Indicators

Name

Description

STAT

Board status indicator

On (green): the board is working normally.

On (red): the board hardware is faulty.

On (orange): the board is not loaded with the logic.

Off: the board is not running or no power is input.

L/A 0 to 3

Connection/data transmission status indicator

On (green): the connection on the physical port is normal.

Blinking (orange or green): The connection on the physical port is normal, and data is received or transmitted on the port.

Off: the physical connection fails.

Table 4-139 Service interfaces

Interface Name

Interface Type

Connector Type

Description

Cable

OUT0 IN0 to OUT3 IN3

10GE

SFP+

10GE service signal input and output interface

Optical Fibers

Functional Specifications

Table 4-140 Functions and features

Functions and Features

Remarks

Line-Rate capability

Occupies one flexible card slot.

Supports the line-rate receiving and transmitting on four 10GE interfaces and supports SFP+ optical modules on the interfaces.

Reliability and availability

Supports the hot swappable function.

GE/10GE autonegotiation supported

Supports

Interface function

Supports the full duplex mode or auto-negotiation mode.

Supports inloops and outloops.

Supports the traffic control function.

Supports Layer 2 and Layer 3 working modes.

Technical Specifications

Table 4-141 Interface specifications

Attribute

Description

Working mode

Full-duplex

Compliant standard

Supports Ethernet IEEE 802.3 standard network protocol

Table 4-142 Board specifications

Item

Specification

Dimensions (H x W x D)

19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)

Typical power consumption

30.2 W

Typical heat dissipation

98.0 BTU/hour

Weight

0.7 kg (1.54 lb)

Ambient temperature

Long terms: -40 °C to 65 °C (-40°F to 149°F)

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16897

Downloads: 131

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next