No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Hardware Description

NE05E and NE08E V300R003C10SPC500

This is NE05E and NE08E V300R003C10SPC500 Hardware Description
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
4 Channels C37.94 Optical Interface and 4 Channels CoDir64K Electric Interface Board

4 Channels C37.94 Optical Interface and 4 Channels CoDir64K Electric Interface Board

Overview

Table 4-129 Board attributes

Attribute

Description

Board name silkscreen

D1MP8A

Description

4 Channels C37.94 Optical Interface and 4 Channels CoDir64K Electric Interface Board

BOM

03056886

Model

NEDD01MP8A00

Table 4-130 Mapping products and versions

Product

Slot ID

Earliest Software Version

NE08E-S6E

All slots(with MPU - NED3CXPA)

All slots(with MPU - NED3CXPB)

V300R003C00

NE08E-S9

All slots(with MPU - NEJ1CXPA)

V300R003C10

Appearance



Panel

Table 4-131 Indicators

Name

Description

STAT

Board status indicator

On (green): the board is working normally.

On (red): the board hardware is faulty.

On (orange): the board is not loaded with the logic.

Off: the board is not running or no power is input.

LOS (C37.94)

Connection/data transmission status indicator

On (green): the connection of the port is normal.

On (orange): LOS alarms are generated on the portOff: the physical connection fails.

Off: The device is not powered on or has not been initialized.

LINK (Codir)

Connection/data transmission status indicator

On (green): the data interface is transmitting or receiving data.

Off: the physical port connection fails.

LOS (Codir)

Connection/data transmission status indicator

On (orange): LOS alarms are generated on the port.

Off: The device is not powered on or has not been initialized.

Table 4-132 Service interfaces

Interface Name

Interface Type

Connector Type

Description

Cable

OUT0 IN0 to OUT3 IN3

C37.94

SFP

Used for C37.94 signal input

Optical Fibers

Codir 4 to 7

64 kbit/s codirectional interface

RJ45

Used for 64 kbit/s codirectional data signal input

120-Ohm 1 x E1 Cables

Functional Specifications

Table 4-133 Functions and features

Functions and Features

Remarks

Line-Rate capability

Occupies one flexible card slot.

Supports the line-rate receiving and transmitting on four 2M interfaces and supports 2M SFP optical modules on the interfaces.

Reliability and availability

Supports the hot swappable function.

Interface function

Supports the full duplex mode or auto-negotiation mode.

Supports inloops and outloops.

Supports the traffic control function.

Supports Layer 2 and Layer 3 working modes.

Technical Specifications

Table 4-134 Interface specifications

Attribute

Description

Working mode

Full-duplex

Compliant standard

Supports IEEE C37.94

Supports ITU-T G.703

Table 4-135 Board specifications

Item

Specification

Dimensions (H x W x D)

19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)

Typical power consumption

6.2 W

Typical heat dissipation

20.1 BTU/hour

Weight

0.5 kg (1.10 lb)

Ambient temperature

Long terms: -5 °C to 55 °C (23°F to 131°F)

Translation
Download
Updated: 2019-01-14

Document ID: EDOC1100058943

Views: 16113

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next