No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudEC V600R019C00 Fault Information Collection (Enterprise On-premises, Convergent Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Sound and Color Bar Tests

Sound and Color Bar Tests

Table 22-1 lists the sound and color bar tests.

Table 22-1 Sound and color bar tests


Item to Be Tested

Signal Stream


2 audio output

2 → Speaker

Color bar

4 video output

4 → Monitor

  • Sound test: Choose Maintenance > Diagnostics. On the Diagnostics page, click Sound Test. While the test audio stored on your endpointRP plays, check the sound quality.
  • Color bar test: Choose Maintenance > Diagnostics. On the Diagnostics page, click Color Bar Test. Seven color bars are shown on the display for you to check the color quality.
Updated: 2019-04-01

Document ID: EDOC1100059082

Views: 6484

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next