No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudEC V600R019C00 Fault Information Collection (Enterprise On-premises, Convergent Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Remote Control Test

Remote Control Test

Test the keys on the remote control to check whether they are functioning properly.

If only some of the keys are tested, you can exit the Remote Control Test screen by pressing and holding on the remote control.

When all the keys are tested, the Remote Control Test screen automatically exits.

The normal operating distance of the remote control is 6 meters. Its performance may be affected under strong light. If the remote control does not work, verify that:

  • The DP300 is powered on.
  • The positive and negative charges of the battery are connected correctly.
  • The battery has sufficient power left.
  • There are no special fluorescent or neon signs nearby.
Updated: 2019-04-01

Document ID: EDOC1100059082

Views: 6387

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next