No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Fault Information Collection (Enterprise On-premises, Convergent Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Route Test

Route Test

A route test helps determine the path that a data packet at the network layer uses to access a destination address.

Before you perform route test, choose System Settings > Network > Network diagnostics and set Network diagnostics to Enable.

Table 22-4 lists the parameters that you need to set before performing a route test.

Table 22-4 Route parameters

Parameter

Description

Setting

Address

Specifies the IP address or domain name of the destination device.

Example: 10.10.10.1

Maximum hops

Specifies the maximum allowed hops.

Example: 5

Timeout time (s)

Specifies the timeout duration for the call waiting time, in seconds.

Example: 1

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059082

Views: 7146

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next