No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling SSLv3 Configurations

Enabling SSLv3 Configurations


By default, the SSLv3 is disabled for the SMC2.0 and standalone SC.

The SSLv3 has vulnerabilities, making it easier for hackers to obtain transmission data through attacks. Therefore, enabling the SSLv3 may result in risks of transmission data leakage.

Enabling SSLv3 Configurations of the SMC2.0

  1. Log in to the SMC 2.0 server as the admin user.
  2. Choose Start > Run. In the Run search box that is displayed, enter regedit to open Registry Editor.
  3. In the navigation tree on the left, choose HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > SecurityProviders > SCHANNEL > Protocols > SSL 3.0 > Server.

    If there is no SSL 3.0 and Server under Protocols, right-click Protocols and choose New > Key from the shortcut menu. Then, set the folder name to SSL 3.0. Create the Server folder under SSL 3.0 in a similar manner.

  4. Right-click in the blank area on the right and choose New > DWORD (32-bit) Value. Create two registry entries and set their file names to Enabled and DisabledByDefault respectively.

    If the Enabled and DisabledByDefault registry entries already exist in the Server folder, skip this step.

  5. Double-click the Enabled registry entry in the pane on the right. In the dialog box that is displayed, set Value data to 1.
  6. Double-click the DisabledByDefault registry entry in the pane on the right. In the dialog box that is displayed, set Value data to 0.
  7. Click OK.
  8. Restart the operating system to validate parameter settings.
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 17873

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next