No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Upgrade Authentication Account Password

Changing the Upgrade Authentication Account Password


The MCU software can be remotely upgraded from the SMC. When the SMC is used to upgrade the MCU software, the SMC and MCU verify the authentication account (administrator). To improve upgrade security, change the authentication account password.


  1. Log in to the MCU from PuTTY.
  2. At the <HUAWEI VP9650> prompt, enter system-view smc-administrator-pwd and press Enter.
  3. At the administrator password{max len:16} prompt, enter the new password and press Enter.
  4. At the <HUAWEI VP9650> prompt, enter save and press Enter.

    The following information is displayed:

    are you sure to save config?(y/n)

  5. Enter y and press Enter.
  6. At the <HUAWEI VP9650> prompt, enter reboot and press Enter to restart the MCU.
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 16931

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next