No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling BFCP-based Encryption

Enabling BFCP-based Encryption

The VP9600 series MCUs support SIP-based presentation communication through the Binary Floor Control Protocol(BFCP) protocol. TLS functions as a security mechanism to ensure BFCP signaling encryption transmission. To ensure interoperability, BFCP automatically selects the transmission protocol by default. When you hold an encrypted conference, it is recommended that you use the TLS protocol for the VP9600 series MCUs and videoconferencing endpoints to improve communication security.

  1. Use the PuTTY tool to log in to a VP9600 series MCU.
  2. After the <HUAWEI VP9650> prompt, enter system-view conf-policy bfcp-trans-type and press Enter.

    The following information is displayed:

    Bfcp Trans Type{0:AUTO 1:UDP 2:TLS}[0]:

  3. Enter 2 and press Enter.
  4. After the <HUAWEI VP9650> prompt, enter save and press Enter.

    The following information is displayed:

    are you sure to save config?(y/n)

  5. Enter y and press Enter.
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 18541

Downloads: 10

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next