No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying SNMP Settings

Modifying SNMP Settings

Context

The SMC2.0 uses SNMP to send configuration and status query requests to the VP9600 series MCU and the VP9600 series MCU uses SNMP to send trap messages to the SMC2.0 for it to implement network management functions. The VP9600 series MCU supports SNMPv2 and SNMPv3. To improve communication security, use SNMPv3.

Procedure

  1. Log in to the VP9600 series MCU from PuTTY.
  2. Change SNMP connection mode.
    1. At the <HUAWEI VP9650> prompt, enter system-view snmp-config and press Enter.
    2. At the enable snmp{0: disable, 1:enable;}[1]promt, enter1 and press Enter.
    3. At the select connect mode{1:V2 Mode, 2:V3 Mode, 3:V2 and V3 Mode} prompt, enter 2 and press Enter.
    4. At the SNMP V3trap send mode{0:inform 1:trap} prompt, enter 1 and press Enter.

      NOTE:
      Retain the default settings for other parameters by pressing Enter repeatedly until the [HUAWEI VP9650] prompt is displayed.

  3. Set the SNMPv3 account.

    NOTE:
    To improve transmission security, enable authentication and encryption and set the encryption password (auth password) and encryption password (Encrypt password) to different values. To restrict the number of accounts and improve security, keep only one SNMPv3 account and delete other unnecessary accounts.

    1. At the [HUAWEI VP9650] prompt, enter snmpv3-user-config and press Enter.
    2. At the select operation type{1:add(read/write) user,2:delete user,3:trap user} prompt, enter 1 and press Enter.
    3. At the add user name prompt, enter a user name and press Enter.
    4. At the auth mode prompt, enter 2 and press Enter.
    5. At the auth password{string min:8 max:16} prompt, enter the authentication password and press Enter.
    6. At the Encrypt type prompt, enter 2 and press Enter.
    7. At the Encrypt password{string min:8 max:16} prompt, enter the encryption password and press Enter.
  4. At the <HUAWEI VP9650> prompt, enter save and press Enter.

    The following information is displayed:

    are you sure to save config?(y/n)

  5. Enter y and press Enter.
  6. At the <HUAWEI VP9650> prompt, enter reboot and press Enter to restart the VP9600 series MCU.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 16899

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next