No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Upgrade Authentication Password

Changing the Upgrade Authentication Password

MCU software can be remotely upgraded from the SMC2.0.When the SMC2.0 is used to upgrade the MCU software, the SMC2.0 and MCU verify the authentication account (administrator). To improve upgrade security, change the authentication account password.

  1. Log in to the VP9600 series MCU web interface.
  2. Choose System > Management.
  3. Set Upgrade connection password.

    The default value is Change_Me. The value of this parameter must be the same as that on the SMC2.0.

  4. Click Save.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 16428

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next