No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Connection Settings

Modifying Connection Settings

Context

When the MCU is used with the SMC, modify the connection settings on the MCU so they are consistent with those on the SMC.

Procedure

  1. Log in to the MCU web interface.
  2. Choose Settings > System > Connection Management.

    The Connection Management tab page is displayed.

  3. Select SMC2.0/IMS for Connection type, Encrypt for Connection mode and enter the connection password.

    NOTE:
    The default value of Connection password is Change_Me.

  4. Click Save to restart the MCU.

    NOTE:
    You can also run system-view manage-config and set connect type and connect password. For details, see the HUAWEI VP9660&VP9650&VP9630 Command Reference.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 16424

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next