No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Security Maintenance (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Web User Management of the VP9600 Series MCU (V600R019C00)

Web User Management of the VP9600 Series MCU (V600R019C00)

Creating/Modifying/Deleting a Web Account

All web accounts have the same operation rights on the web interface. Only the system default user admin can create or delete other user accounts, but the admin account itself cannot be deleted.

  1. Log in to the VP9600 series MCU web interface as the admin user.
  2. Choose System > Users.
  3. Click New.

    NOTE:
    • You can click or next to an account to delete the account or modify account information.
    • The admin account is the system default account and cannot be used as the account of the new user.

  4. Enter the account information as prompted.
  5. Click Save.

Changing the Web Account Password

You are advised to change the web account password periodically to ensure account safety. The password must meet complexity requirements. The default validity period of the web account password is 90 days. To change the password validity period, choose System > Security and set Web user password validity period (90-365 days).

  1. Open the Internet Explorer, enter the VP9600 series MCU IP address in the address box, for example, https://192.168.2.1:8443, and press Enter.

    The login page is displayed, as shown in Figure 2-16.

    Figure 2-16 Login page

  2. Enter the user name and password and click Log In.

    NOTE:

    The default values of User name and Password are admin and Change_Me respectively. If you enter incorrect passwords for five consecutive times, your account will be locked for five minutes. If you log in to the MCU web interface using the default password, the Change Password page is displayed. Change the password as prompted. Alternatively, go to 3 to change the password.

  3. Click the user name at the upper right corner of the page and choose Change Password.
  4. On the Figure 2-17 page, change the password.

    NOTE:

    The password must be six characters to sixteen characters and contain at least two types of the following characters: digits, uppercase letters, lowercase letters, and special characters.

    Figure 2-17 Changing the password

  5. Click Save.

Changing the Password for Logging In Using the SSH, Telnet,or Serial Port

The Administrator and test users can change the passwords of all the other users. Other users can change only their own passwords.

  1. Log in to the VP9600 series MCU from PuTTY.
  2. At the <HUAWEI VP9650> prompt, enter system-view telnet-config password and press Enter.

    The following information is displayed:

    User name: administrator
    User name{administrator,user}:

  3. At the User name{administrator,user} prompt, enter the account name for which you want to change the password and press Enter.
  4. Enter the old password if you want to change the password of the administrator user. At the current password prompt, enter the current password and press Enter.
  5. At the new password prompt, enter the new password and press Enter.

    NOTE:

    When you change the password of the administrator user, if the current and new passwords are the same, the "Error:The new password can NOT be the same as the old password!" message is displayed, and you exit the view for changing the password.

  6. At the confirm password prompt, enter the new password again and press Enter.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059091

Views: 20538

Downloads: 11

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next