No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Troubleshooting (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Failed to Use an SSH Client to Access an NE After Being Upgraded

Failed to Use an SSH Client to Access an NE After Being Upgraded

Symptom

When the following NEs are upgraded to their latest versions, you cannot use the SSH client to log in to the NEs:

  • SC
  • VP9000 series MCUs
  • RSE6500
  • TE30&TE40&TE50&TE60

Possible Causes

When the preceding NEs are upgraded, their SSH clients support only the digest algorithms SHA256 and SHA512. The digest algorithms SHA1 and MD5 used in earlier versions are not supported any longer.

Procedure

Use the following SSH client to log in:

  • SecureCRT: version 7.2 or later
  • PuTTY: version 0.63 or later
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059100

Views: 1612

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next