No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CloudEC V600R019C00 Troubleshooting (Enterprise On-premises, Only Conference)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fault Location

Fault Location

Device management is a key service module of the SMC2.0. Various device types and models are available, using different connection methods. If any fault occurs in this module, conferences cannot be properly held, or participants cannot properly join a conference.

Background Information

Communication protocols used by videoconferencing devices are as follows:

  • MCU: SNMP, TCP, and HTTP
  • SC: HTTP
  • RSE6500: HTTP
  • USM-EUA: HTTP, LDAP, and SOAP
  • Endpoint: HTTP

Locating the Fault

  1. Verify that the network is properly connected.
  2. Verify that the connection user name and password are the same as those set on the device.
  3. Verify that the device certificate is valid.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100059100

Views: 1743

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next