No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Engineering Labels for User Cables

Engineering Labels for User Cables

This section describes the applicable ranges and contents of the engineering labels for user cables and provides examples.

Attach labels to both ends of the cable to indicate the locations of the cable on the device and MDF.

Label Interpretation

Table 4-27 describes the contents of the labels.

Table 4-27  Contents of the engineering labels for user cables

Content

Meaning

Example

MN-B-C-D

MN: cabinet number

A01 is the first cabinet in row A.

B: frame number

Numbered bottom to top with two digits, such as 03.

C: physical slot number

Numbered top to bottom and left to right with two digits, such as 01.

D: cable number

Numbered top to bottom and left to right with two digits, such as 01.

MDF-MN-B-C

MN: row number and column number of the MDF

M: The rows of cabinets from front to back are labeled from A to Z. N: The columns of cabinets from left to right are numbered from 01 to 99. G01 is the MDF of row G and column 01.

B: row number of the terminal device

Ranges from 01 to 99, for example, 01.

C: column number of the terminal device

Label Example

Figure 4-57 shows of a label for user cables.

Figure 4-57  Example of labels for user cables

The labels in Figure 4-57 are described as follows:

  • "A01-03-01-01" indicates that the local end of the user cable is connected to port 1 on slot 1, chassis 03 of the cabinet in row A, column 01 in the equipment room.
  • "MDF-G01-01-01-AR" indicates that the opposite end of the user cable is connected to the terminal in row 01, column 01 of the MDF in row G, column 01 in the equipment room.
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 15801

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next