No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
100 Gbit/s CFP Optical Modules

100 Gbit/s CFP Optical Modules

You can use 100 Gbit/s CFP optical modules only on 100 GE interfaces. They provide multiple wavelength ranges. The transmission distance ranges from 0.1 km (0.06 mi.) to 10 km (6.21 mi.).

CFP-100G-LR4 / OSN010N04

Table 1-118   Specifications of the CFP-100G-LR4 / OSN010N04 optical module

Item

Specifications

Part number

Enterprise network market: 02310YTD

Carrier network market: S4017456

Transceiver form factor

CFP

Interface standard

100GBASE-LR4

Transmission rate

103.125 Gbit/s

Interface type

LC

Applicable cable and maximum transmission distance

Single-mode fiber (G.652) (with diameter of 9 μm): 10 km

Modal bandwidth

-

Center wavelength

1295 nm

1300 nm

1304 nm

1309 nm

Maximum transmit optical power

4.5 dBm

Minimum transmit optical power

-4.3 dBm

Minimum extinction ratio

4.0 dB

Receiver sensitivity

-10.6 dBm

Overload optical power

4.5 dBm

CFP-100G-SR10 / OSN010003

Table 1-119   Specifications of the CFP-100G-SR10 / OSN010003 optical module

Item

Specifications

Part number

Enterprise network market: 02310YTB

Carrier network market: S4017457

Transceiver form factor

CFP

Interface standard

100GBASE-SR10

Transmission rate

103.125 Gbit/s

Interface type

MPO

Applicable cable and maximum transmission distance

  • Multimode fiber (OM2) (with diameter of 50 μm): 30 m
  • Multimode fiber (OM3) (with diameter of 50 μm): 100 m
  • Multimode fiber (OM4) (with diameter of 50 μm): 150 m

Modal bandwidth

  • Multimode fiber (OM2): 500 MHz*km
  • Multimode fiber (OM3): 2000 MHz*km
  • Multimode fiber (OM4): 4700 MHz*km

Center wavelength

850 nm

Maximum transmit optical power

-2.4 dBm

Minimum transmit optical power

-7.6 dBm

Minimum extinction ratio

3 dB

Receiver sensitivity

-9.5 dBm

Overload optical power

2.5 dBm

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 18975

Downloads: 34

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next