No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Cable Racks and Mounting Ears

Installing Cable Racks and Mounting Ears

Mounting ears are used to fix a device to the cabinet, and cable racks are used to route optical fibers and cables.

Procedure

  • Install the cable rack.

    Figure 2-6  Installing the cable rack

  • Install the mounting ears

    NOTE:

    Before installing the mounting ears, measure the distance (L) between the mounting bar and the front door. The mounting ear is installed is different ways depending on the distance L, as shown in the following figures.

    Figure 2-7  Space between the surface of the mounting ear and the inside of the front door
    Figure 2-8  Direction of mounting ear installation depending on distance L

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 14542

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next