No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Corrosive Gases Requirements

Corrosive Gases Requirements

The room should be free of corrosive gases, such as SO2, H2S, and NH3. Table 4-12 lists the requirements on the corrosive gas concentration.
Table 4-12  Requirements on corrosive gas concentration

Chemical active material















To meet the preceding requirements, take the following measures:
  • The equipment room should not be located near an area where the corrosive gas concentration is high, such as a chemical plant.
  • Ensure the air intake vent of the room is upwind of the pollution source.
  • Batteries should be separated and ideally set up in different rooms.
  • An authoritative organization should monitor corrosive gas conditions regularly.
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 14573

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next