No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Equipment Room Layout

Equipment Room Layout

The equipment room is usually used to install mobile switching equipment, telecom transmission equipment, and power supply equipment as well as other auxiliary equipment. To facilitate maintenance and management, place telecom equipment in different rooms. Figure 4-42 shows the recommended layout of the equipment room.
Figure 4-42  Layout of the equipment room

The general layout principles of the equipment room are as follows:
  • Meet requirements for laying out and maintaining communication cables and power cables.
  • Minimize cabling distance, which facilitates cable maintenance, reduces potential communication faults, and raises efficiency.
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 14493

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next