No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
1.25 Gbit/s SFP/eSFP Optical Modules

1.25 Gbit/s SFP/eSFP Optical Modules

You can use different levels of 1.25 Gbit/s SFP/eSFP optical modules with GE interfaces and 10 GE interfaces. The wavelength of common 1.25 Gbit/s SFP/eSFP optical modules can be 850 nm, 1310 nm, or 1550 nm, and the transmission distance ranges from 0.5 km (0.31 mi) to 80 km (49.71 mi).

eSFP-GE-SX-MM850 / eSFP-850nm-1000Base-Sx/FC200 MM

Table 1-107  Specifications of the eSFP-GE-SX-MM850 / eSFP-850nm-1000Base-Sx/FC200 MM optical module

Item

Specifications

Part number

Enterprise network market: 02315204

Carrier network market: 34060286

Transceiver form factor

eSFP

Interface standard

1000BASE-SX

Transmission rate

1.25 Gbit/s

Interface type

LC/PC

Applicable cable and maximum transmission distance

  • Multimode fiber (with diameter of 62.5 μm): 220 m
  • Multimode fiber (OM1) (with diameter of 62.5 μm): 275 m
  • Multimode fiber (with diameter of 50 μm): 500 m
  • Multimode fiber (OM2) (with diameter of 50 μm): 550 m

Modal bandwidth

  • Multimode fiber: 160 MHz*km
  • Multimode fiber (OM1): 200 MHz*km
  • Multimode fiber: 400 MHz*km
  • Multimode fiber (OM2): 500 MHz*km

Center wavelength

850 nm

Maximum transmit optical power

-3 dBm

Minimum transmit optical power

-9 dBm

Minimum extinction ratio

9.0 dB

Maximum receiver sensitivity

-17 dBm

Overload power

0 dBm

SFP-GE-LX-SM1310 / OSG010N05

Table 1-108  Specifications of the SFP-GE-LX-SM1310 / OSG010N05 optical module

Parameter

Specifications

Part number

Enterprise network market: 02315200

Carrier network market: S4016067

Transceiver form factor

eSFP

Interface standard

1000BASE-LX

Transmission rate

1.25 Gbit/s

Interface type

LC/PC

Applicable cable and maximum transmission distance

  • Multimode fiber (OM1) (with diameter of 62.5 μm): 550m
  • Multimode fiber (with diameter of 50 μm): 550m
  • Multimode fiber (OM2) (with diameter of 50 μm): 550m
  • Single-mode fiber (G.652) (with diameter of 9 μm): 10 km

Modal bandwidth

  • Multimode fiber (OM1): 200/500 MHz*km
  • Multimode fiber: 400/400 MHz*km
  • Multimode fiber (OM2): 500/500 MHz*km
  • Single-mode fiber (G.652): -

Center wavelength

1310 nm

Maximum transmit optical power

-3 dBm

Minimum transmit optical power

-9 dBm

Minimum extinction ratio

9.5 dB

Minimum receiver sensitivity

-20 dBm

Overload power

-3 dBm

S-SFP-GE-LH40-SM1310 / OSG040002

Table 1-109  Specifications of the S-SFP-GE-LH40-SM1310 / OSG040002 optical module

Parameter

Specifications

Part number

Enterprise network market: 02317346

Carrier network market: S4016954

Transceiver form factor

eSFP

Interface standard

1000BASE-LX

Transmission rate

1.25 Gbit/s

Interface type

LC/PC

Applicable cable and maximum transmission distance

Single-mode fiber (G.652) (with diameter of 9 μm): 40 km

Modal bandwidth

-

Center wavelength

1310 nm

Maximum transmit optical power

0 dBm

Minimum transmit optical power

-5 dBm

Minimum extinction ratio

9dB

Receiver sensitivity

-23 dBm

Overload power

-3 dBm

S-SFP-GE-LH80-SM1550 / eSFP-1550nm-1000Base-Zx/FC100

Table 1-110  Specifications of the S-SFP-GE-LH80-SM1550 / eSFP-1550nm-1000Base-Zx/FC100 optical module

Parameter

Specifications

Part number

Enterprise network market: 02317348

Carrier network market: 34060360

Transceiver form factor

eSFP

Interface standard

1000BASE-ZX

Transmission rate

1.25 Gbit/s

Interface type

LC/PC

Applicable cable and maximum transmission distance

Single-mode fiber (G.652) (with diameter of 9 μm): 80 km

Modal bandwidth

-

Center wavelength

1550 nm

Maximum transmit optical power

3 dBm

Minimum transmit optical power

-2 dBm

Minimum extinction ratio

9 dB

Minimum receiver sensitivity

-22 dBm

Overload power

-3 dBm

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 16284

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next