No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Chassis into the Cabinet

Installing the Chassis into the Cabinet

You can install the NIP6830 in a 19-inch standard cabinet using guide rails.

Context

The Huawei cabinet (code: 02113041) is equipped with a pair of guide rails (code: 63120256). Adjustable guide rails (code: 21242246 and 21242247) are optional and not delivered with the NIP by default. You can purchase them as required.

  • The NIP6830 is heavy and requires two people to lift and move.
  • Use the handles on the chassis sides when moving the device. To avoid damaging the device, do not use the module handles.
  • Do not step on the air filter at the bottom of the cabinet.
NOTE:
The length of the adjustable guide rail (code: 21242246) ranges from 500 mm to 850 mm, and the guide rail can be installed in a cabinet whose depth ranges from 800 mm to 1200 mm. The length of the adjustable guide rail (code: 21242247) ranges from 370 mm to 585 mm, and the guide rail can be installed in a cabinet whose depth ranges from 600 mm to 800 mm. Before installing the adjustable guide rail, adjust the distance between the front and rear angle gauges (rack mounting rails/vertical columns) to satisfy the installation requirements.

Procedure

  1. Install floating nuts and guide rails.
    1. Determine where to install floating nuts and mark the positions using a marker, as shown in Figure 2-9.
    2. Fix the floating nuts in the positions.
    3. Use M6 screws to fix the guide rails in position.

      Figure 2-9  Installing floating nuts and guide rails

  2. Mount the NIP6830 in the cabinet.
    1. Lift up the NIP6830, place it onto the cabinet guide rails, and push it into the cabinet.
    2. Use M6 screws to fix the mounting ears of the NIP6830 to the mounting rack, as shown in Figure 2-10.

      Figure 2-10  Mounting the NIP6830 in the cabinet

Follow-up Procedure

Perform the following checks after the installation:

  • Ensure that the NIP6830 is placed securely inside the cabinet.
  • Ensure that the exhaust area of the NIP6830 is unobstructed.
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 13912

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next