No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Engineering Labels for Optical Fibers

Engineering Labels for Optical Fibers

This section describes the engineering labels for optical fibers, including the labels for the optical fibers between devices and the labels for the optical fibers between a device and an ODF.

These labels are affixed to the optical fibers that connect the optical interfaces on the boards in a chassis or on a fixed-configuration device. There are two types of labels for optical cables:
  • Label for the fiber that connects the optical interfaces on two devices
  • Label for the fiber that connects the device and the ODF

Labels for Optical Fibers Connecting Devices

Meaning of Labels
Table 4-22 lists information on both sides of the labels affixed to the optical fibers that connect two devices.
Table 4-22  Information on one side of labels affixed to the optical fiber that connects two devices

Content

Meaning

Example

MN-B-C-D-R/T

MN: cabinet number

M: The cabinet rows from front to back are labeled from A to Z.

N: The cabinet columns from left to right are labeled from 01 to 99.

A01 is the cabinet in Row A and Column 01.

B: chassis number

Numbered bottom to top with two digits, such as 01.

C: physical slot number

Numbered top to bottom and left to right starting from 01. For example, A01 is the slot with number 1.

D: optical interface number.

Numbered from top to bottom and left to right with two digits. For example, 01 is the number 1 optical interface.

R: optical receiving interface

T: optical transmitting interface

-

MN-B-C-D-R/T

MN: cabinet number

M: The cabinet rows from front to back are labeled from A to Z.

N: The cabinet columns from left to right are labeled from 01 to 99.

For example, A01 is the cabinet in Row A and Column 01.

Numbered from bottom to top with two digits, such as 01.

B: chassis number

-

C: physical slot number

Numbered from top to bottom and left to right with two digits starting from 01. For example, A01 is the slot with number 1.

D: optical interface number.

Numbered from top to bottom and left to right with two digits. For example, 01 is the number 1 optical interface.

R: optical receiving interface

T: optical transmitting interface

-

Label Example

Figure 4-52 shows an example of a label on an optical fiber connecting two devices.

Figure 4-52  Example of the label on the optical fiber between two devices

The labels are described as follows:
  • "A0-01-05-01-R" indicates that the local end of the optical fiber is connected with the optical receiving interface 01 on slot 5, chassis 01 in the cabinet in row A, column 01 in the machine room.
  • "G01-01-01-01-T" indicates that the opposite end of the optical fiber is connected with optical transmitting interface 01 on slot 01, chassis 01 in the cabinet on tow G, column 01 in the machine room.

Labels for the Optical Fibers Connecting the Device and an ODF

Meaning of the Labels
Table 4-23 shows the information on both sides of the labels affixed to the optical fiber that connects the device and the ODF.
Table 4-23  Information on one side of the label affixed to the fiber between the device and the ODF

Content

Meaning

Example

MN-B-C-D-R/T

MN: cabinet number

A01.

B: chassis number

Numbered from bottom to top with two digits, such as 01.

C: physical slot number

Numbered bottom to top with two digits, such as 01.

D: optical interface number.

Numbered bottom to top and left to right, such as 01

R: optical receiving interface

T: optical transmitting interface

-

ODF-MN-B-C-R/T

MN: row number and column number of an ODF

M: The cabinet rows from front to back are labeled from A to Z.

N: The cabinet columns from left to right are labeled from 01 to 99.

For example, G01 is the ODF of Row G and Column 01.

B: row number of the terminal device

Range from 01 to 99, such as 01-01.

C: row number of the terminal device

R: optical receiving interface

T: optical transmitting interface

-

Label Example

Figure 4-53 shows an example of a label on an optical fiber that connects the device and the ODF.

Figure 4-53  Example of the label on the optical fiber between the device and the ODF

The labels in Figure 4-53 are described as follows:
  • "ODF-G01-01-01-R" indicates that the local end of the optical fiber is connected with the optical receiving terminal in row 01, column 01 of the ODF in row G, column 01 in the machine room.
  • "A01-01-05-01-R" indicates that the opposite end of the optical fiber is connected with optical receiving interface 1 on Slot 01, chassis 01 in the cabinet in row A, column 01 in the machine room.
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 13890

Downloads: 26

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next