No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Chassis Components

Installing Chassis Components

Air filters are used to protect devices against dust, and cable racks are used to route optical fibers and cables.


  • Install air filters on the air intake frame.


    Orient the pin on the air filter towards the hole to prevent installing upside down. Otherwise, the air filter cannot be installed.

    Figure 2-34  Installing air filters on the air intake frame

  • Install the cable rack.

    1. Attach the front cable rack to the cabinet.
    2. Slide the rack to the right to click it into place.
    3. Use two M4 x 10 screws to fasten the cable rack.

    Figure 2-35  Installing the cable rack

Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 19013

Downloads: 34

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next