No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Engineering Labels for Cables

Engineering Labels for Cables

This section provides an overview of labels and describes the labels for optical fibers, Ethernet cables, and power cables.

Labels facilitate on-site installation and maintenance.

There are two main types of cable labels:
  • Single cable labels used on network cables, optical fibers, trunk cables, and user cables (excluding antenna feeders)
  • Power cable labels used on AC power cables and DC power cables (excluding the power bus cable)
NOTE:

If the user needs an integrated label description, fill in the label according to the user's requirements. Make a note of this in the self-check report.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 14613

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next