No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI NIP6800 Series V500 Hardware Guide

This document of the NIP6800 Series describes hardware structure, installation guide, and hardware maintenance. The content of this document includes the appearance and specifications of the product, the supported expansion cards, preparation before the installation, installation, cabling, and hardware replacement.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cable Assembly Precautions

Cable Assembly Precautions

Check the cables and connector components, choose appropriate cables and connector components, and assemble them properly according to the cable assembly precautions.

Checking the Cables

  • If the jacket or insulation layer of a cable is visibly dirty, clean it before assembly.
  • If the jacket or insulation layer of a cable is visibly damaged or has any significant defect, do not use the cable.
  • If the shield layer of a cable is visibly damaged, do not use the cable.
  • If the jacket or insulation layer of a cable crack after the cable is bent or twisted, check whether other cables have the same problem. If other cables do not have this problem, use one of them instead of the defective cable. If other cables have the same problem, do not use any of the cables and obtain replacements.

Checking the Connectors

  • If a connector has any visible defect, damage, rust, or scuffing, do not use it.
  • If the pins or shells of a connector are damaged, do not use the connector.
  • If there is dirt on the pins or in the jacks of a connector or if there are conductors between pins or between pins and the shell, do not use the connector.

Precautions for Assembly

  • Use dedicated tools or tools from Huawei and follow the assembly procedure.
  • When installing or removing cable components, handle the cable terminals instead of the cables.
  • Take the following precautions when cutting or peeling cables:
    • After cutting cables, keep the extra lengths of cable.
    • After cutting cables, coil the cables that exceed 2 m. Bind and fasten the coils using bundling ropes. Ensure that the inner diameter of the coils is at least 20 times greater than the outer diameters of the cables.
    • When peeling the cable jackets, avoid damaging the shielding layers (braid or aluminum foil), insulation layers, core conductors, and other jackets that do not need to be peeled.
    • Clean sections of exposed jacket (for example, the dead ends of power cables). Cut all cables flush.
    • Do not touch the core conductors of cables. Handle the conductor peeled from cables quickly so that the conductor surface does not oxidize.
  • Take the following precautions when crimping and connecting cables or connectors:
    • Ensure that terminals and conductors are connected securely after they are crimped. Do not move or bend them.
    • Cut all exposed copper wire.
    • Avoid crimping sleeves twice.
    • Keep all conductors clean and neat.
NOTE:

Connectors, cables, and tools provided by different vendors may differ. Figures in this document are for reference only.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059253

Views: 15831

Downloads: 26

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next