No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - IP Routing 01

This is ME60 V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OP-Route Configuration

OP-Route Configuration

Open programming (OP)-routes are selected by the controller according to its own criteria and sent to forwarding devices through a NETCONF interface. Upon receipt of the OP-routes, the forwarding devices store them in their routing tables and use BGP to advertise them. With OP-routes, routes are controlled centrally to meet user requirements.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059437

Views: 20386

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next