No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - IP Routing 01

This is ME60 V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining BGP4+

Maintaining BGP4+

Maintaining BGP4+ involves resetting BGP4+ connections, clearing BGP4+ statistics, and debugging BGP4+.

Resetting BGP4+ Connections

Resetting BGP4+ connections interrupts peer relationships.

Context

BGP4+ peer relationships between ME devices are deleted if you reset BGP4+ connections using the reset bgp ipv6 command. Exercise caution when resetting BGP4+ connections.

When a BGP4+ routing policy (the ME device does not support the router-fresh capability) is changed, reset BGP connections so that the new configuration can take effect. To reset BGP4+ connections, run any of the following commands in the user view:

Procedure

  • Run the reset bgp ipv6 all command to reset all BGP4+ connections.
  • Run the reset bgp ipv6 as-number command to reset a BGP4+ connection between two devices in different ASs.
  • Run the reset bgp ipv6 ipv4-address command to reset a BGP4+ connection between specified BGP4+ peers.
  • Run the reset bgp ipv6 external command to reset all EBGP connections.
  • Run the reset bgp ipv6 internal command to reset all IBGP connections.

Clearing BGP4+ Statistics

Clearing BGP4+ statistics involves clearing route flapping statistics and route dampening statistics.

Context

BGP4+ statistics cannot be restored after they are cleared. Exercise caution when using reset commands.

Procedure

  • Run the reset bgp ipv6 flap-info [ regexp as-path-regexp | as-path-filter { as-path-filter-number | as-path-filter-name } | ipv6-address prefix-length ] command in the user view to clear route flapping statistics.
  • Run the reset bgp ipv6 ipv6-address flap-info command in the user view to clear route flapping statistics on a specified peer.
  • Run the reset bgp ipv6 dampening [ ipv6-address prefix-length ] command in the user view to clear route dampening statistics and release suppressed routes.
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059437

Views: 20409

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next