No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - IP Routing 01

This is ME60 V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Network Management Function of OSPF

Configuring the Network Management Function of OSPF

OSPF supports the network management function. You can bind the OSPF MIB to an OSPF process and configure trap and log functions.

Usage Scenario

Through the Simple Network Management Protocol (SNMP), the OSPF Management Information Base (MIB) manages information exchanged between the NMS and agents.

Pre-configuration Tasks

Before configuring the network management function of OSPF, complete the following tasks:

  • Configure a link layer protocol.

  • Configure IP addresses for interfaces to ensure that neighboring nodes are reachable at the network layer.

  • Configure basic OSPF functions.


  1. Run system-view

    The system view is displayed.

  2. Run ospf mib-binding process-id

    The OSPF process is bound to the MIB.

  3. Run commit

    The configuration is committed.

Checking the Configurations

Run the following commands to check the previous configuration.

Run the display ospf [ process-id ] brief command to view information about the binding of OSPF MIBs and OSPF processes.

Updated: 2019-01-04

Document ID: EDOC1100059437

Views: 20411

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next