No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - IP Routing 01

This is ME60 V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Route Attribute Set Configuration

Verifying the Route Attribute Set Configuration

After configuring route attribute sets, verify the configuration.

Prerequisites

Route attribute sets have been configured.

Procedure

  • Run the display xpl { as-path-list | community-list | ext-community-list rt | ext-community-list soo | ip-prefix-list | ipv6-prefix-list | route-filter | rd-list | route-flow-group | interface-list } [ name xpl-name attachpoints ] command to check detailed information about XPL route attribute sets or references.
  • Run the display xpl { as-path-list | community-list | ext-community-list rt | ext-community-list soo | ip-prefix-list | ipv6-prefix-list | rd-list | route-filter | route-flow-group | interface-list } state [ attached | unattached ] command to check information about route attribute set configurations and references.

    NOTE:
    To view detailed configurations of XPL, run the display current-configuration configuration xpl command.

Example

Run the display xpl ip-prefix-list command to view the information about IPv4 prefix sets.

<HUAWEI> display xpl ip-prefix-list
prefix1

Run the display xpl ip-prefix-list state command to view detailed information about IPv4 prefix set configurations and references.

<HUAWEI> display xpl ip-prefix-list state
Attached :Applied by at least one attach point
Unattached : Not applied by any attach point

Attached
---------------------------------------------------------------

Unattached
---------------------------------------------------------------
aaa
Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059437

Views: 22442

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next