No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - IP Routing 01

This is ME60 V800R010C10SPC500 Configuration Guide - IP Routing
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP Extensions

Configuring BGP Extensions

Configuring BGP extensions enables BGP to provide routing information for multiple routing protocols.

Usage Scenario

The section does not describe the commands that are associated with specific applications and used in the MP-BGP address family view in details.

For the BGP configurations in the IPv6 address family view, see chapter "BGP4+ Configuration."

For the BGP configurations in the BGP-IPv4 address family view and the BGP-VPN instance address family view, see the HUAWEI ME60 Multiservice Control Gateway Configuration Guide - VPN.

For the applications of MP-BGP on multicast networks, see chapter "MBGP Configuration" in the HUAWEI ME60 Multiservice Control Gateway Configuration Guide - IP Multicast.

Pre-configuration Tasks

Before configuring BGP extensions, complete the following task:

Configuration Procedures

None.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059437

Views: 20895

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next