No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring an Interface to Transparently Transmit HVRP Packets

(Optional) Configuring an Interface to Transparently Transmit HVRP Packets

Procedure

  1. Run the system-view command on a switch in an STP domain:

    The system view is displayed.

  2. Run interface gigabitethernet interface-number

    The GE interface view is displayed.

  3. Run portswitch

    The working mode of the interface is switched to the Layer 2 mode.

  4. Run stp enable

    STP is enabled on the interface.

  5. Run hvrp-transport

    The interface is configured to transparently transmit HVRP packets.

    NOTE:

    The command is supported only in the multi-instance scenario rather than the multi-process scenario.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 29275

Downloads: 21

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next