No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an MSTP Process

Creating an MSTP Process

A process ID uniquely identifies a Multiple Spanning Tree Protocol (MSTP) multi-process. After an MSTP device binds its ports to different processes, the MSTP device performs the MSTP calculation based on processes, and only relevant ports in each process take part in MSTP calculation.


Do as follows on the devices connected to access rings:


  1. Run system-view

    The system view is displayed.

  2. Run stp process process-id

    An MSTP process is created and the MSTP process view is displayed.

  3. Run stp mode mstp

    A working mode is configured for the MSTP process.

    • After a device starts, there is a default MSTP process with the ID 0. MSTP configurations in the system view and interface view belong to this process. The default working mode of this process is MSTP.

    • To add an interface to an MSTP process with the ID of non-zero, run the stp process command and then the stp binding process command.

  4. Run commit

    The configuration is committed.

Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 29850

Downloads: 21

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next