No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VLAN

Licensing Requirements and Limitations for VLAN

Licensing Requirements

This feature is a basic feature and is not under license control.

Restrictions and Guidelines

Restrictions

Guidelines

Impact

Switching is not supported on VLANIF interfaces.

None

VLANIF interface switching can only be performed through hard convergence.

VLANs cannot support the Layer 3 function of VLANIF interfaces after the port vlan-mapping and port vlan-stacking commands are configured.

Do not configure the Layer 3 function on VLANIF interfaces when the port vlan-mapping and port vlan-stacking commands are configured.

VLANIF interfaces cannot forward Layer 3 traffic.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 26307

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next