No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MSTP Multi-process Configuration

Verifying the MSTP Multi-process Configuration

After Multiple Spanning Tree Protocol (MSTP) multi-process is configured, verify the configuration.


All configurations of MSTP multi-process are complete.


  1. Run the display stp process process-id [ instance instance-id ] [ interface interface-type interface-number ] [ brief ] command to view spanning-tree status and statistics.


Run the display stp command, and you can view the working mode of the spanning tree and port priority configured in a Multiple Spanning Tree Protocol (MSTP) process. For example:

<HUAWEI> display stp process 2 interface gigabitethernet 1/0/2
 Port Protocol       :enabled
 Port Role           :Root Port
 Port Priority       :128
 Port Cost(Dot1T )   :Config=auto / Active=1
 Desg. Bridge/Port   :32768.00e0-0c1f-4100 / 128.1
 Port Edged          :Config=default / Active=disabled
 Point-to-point      :Config=auto / Active=true
 Transit Limit       :147 packets/hello-time
 Protection Type     :Root
 Port STP Mode       :MSTP
 Port Protocol Type  :Config=auto / Active=dot1s
 BPDU Encapsulation  :Config=stp / Active=stp
 PortTimes           :Hello 2s MaxAge 20s FwDly 15s RemHop 20
 TC or TCN send  :1
 TC or TCN received  :2
 BPDU Sent           :2
          TCN: 0, Config: 0, RST: 0, MST: 2
 BPDU Received       :76
          TCN: 0, Config: 0, RST: 0, MST: 76
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 26478

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next