No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining STP/RSTP

Maintaining STP/RSTP

STP/Rapid Spanning Tree Protocol (RSTP) maintenance includes resetting STP/RSTP statistics.

Monitoring the Statistics on STP/RSTP Topology Changes

The statistics about STP/Rapid Spanning Tree Protocol (RSTP) topology changes can be viewed. If the statistics increase, network flapping occurs.

Procedure

  • Run the display stp topology-change command to view the statistics about STP/RSTP topology changes.
  • Run the display stp [ interface interface-type interface-number | vsi vsi-name pw pw-name | slot slot-id ] tc-bpdu statistics command to view the statistics about sent and received Topology Change (TC)/Topology Change Notification (TCN) packets.

Clearing STP/RSTP Statistics

You can run the reset commands to reset STP/Rapid Spanning Tree Protocol (RSTP) statistics to 0.

Context

STP/RSTP statistics cannot be restored after you clear them. Therefore, exercise caution when using the reset commands.

After you confirm that STP/RSTP statistics need to be cleared, run the following command in the user view.

Procedure

  1. Run the reset stp [ interface interface-type interface-number | vsi vsi-name pw pw-name ] statistics command to clear spanning-tree statistics.
  2. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 26967

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next