No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Layer 2 Protocol Tunneling Configuration (By Replacing Multicast Destination MAC Address)

Layer 2 Protocol Tunneling Configuration (By Replacing Multicast Destination MAC Address)

Layer 2 protocol tunneling ensures transparent transmission of private Layer 2 PDUs over a public network.To prevent a backbone network edge device from sending the received Layer 2 protocol data units (PDUs) to its CPU for processing and ensure that the Layer 2 PDUs are tunneled across the backbone network, configure the edge device to replace the multicast destination MAC address in Layer 2 PDUs with a specified multicast MAC address.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 35801

Downloads: 27

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next