No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a GVRP Registration Mode for an Interface

(Optional) Configuring a GVRP Registration Mode for an Interface

Context

The following three GVRP registration modes are available on GVRP interfaces:
  • Normal mode: allows a GVRP interface to register, deregister, and propagate dynamic and static VLANs.
  • Fixed mode: forbids a GVRP interface to register, deregister, or propagate dynamic VLANs, but allows it to register, deregister, and propagate static VLANs. If a trunk interface is set to work in fixed mode, even if packets of all VLANs are allowed to pass, only packets in manually created VLANs actually pass through the trunk interface.
  • Forbidden mode: forbids a GVRP interface to register or deregister all VLANs. If a trunk interface is set to work in forbidden mode, all VLANs are not allowed to pass.
NOTE:

When the GARP timer uses the default value, the device supports a maximum of 100 dynamic VLANs. When the GARP timer uses the recommended value, the device supports a maximum of 4094 dynamic VLANs.

The GVRP function runs only on CIST instances on MSTP, and the interfaces congested by MSTP on CIST instances cannot send or receive GVRP messages.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run gvrp registration { fixed | forbidden | normal }

    A GVRP registration mode is configured for the interface.

    By default, the GVRP registration mode of an interface is Normal.

    NOTE:

    Before configuring a GVRP registration mode for an interface, you must enable GVRP on the interface.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 29869

Downloads: 21

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next