No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access 01

This is ME60 V800R010C10SPC500 Configuration Guide - LAN Access and MAN Access
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of Eth-Trunk Configuration Tasks

Summary of Eth-Trunk Configuration Tasks

This section describes Ethernet interface features supported by the ME60. Familiarizing yourself with these features helps you complete the configuration tasks quickly and accurately.

Eth-Trunk is a technique that bundles Ethernet interfaces into a logical interface (called an Eth-Trunk interface) to increase bandwidth, load-balance traffic, and improve network reliability.

The ME60 supports three working modes for Eth-Trunk interfaces: static LACP mode, manual 1:1 master/backup mode and manual load balancing mode. The procedure for configuring an Eth-Trunk interface is as follows:
  1. Create an Eth-Trunk interface and specify the working mode of the Eth-Trunk interface.
  2. Add member interfaces to the Eth-Trunk interface for the Eth-Trunk interface to take effect.
  3. Adjust parameters for the Eth-Trunk interface and its member interfaces to improve interface reliability.
  4. (Optional) Configure the Eth-Trunk interface to support other features to improve network reliability. For example, configure Eth-Trunk sub-interfaces for inter-VLAN communication.

Eth-Trunk interfaces support the E-Trunk features to meet special requirements.

Updated: 2019-01-04

Document ID: EDOC1100059440

Views: 27156

Downloads: 18

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next